Bond (finance) - Bank Coupon

- 19.10

Albertsons » Albertsons, Coupons and You
photo src: www.albertsons.com

In finance, a bond is an instrument of indebtedness of the bond issuer to the holders. The most common types of bonds include municipal bonds and corporate bonds. It is a debt security, under which the issuer owes the holders a debt and, depending on the terms of the bond, is obliged to pay them interest (the coupon) and/or to repay the principal at a later date, termed the maturity date. Interest is usually payable at fixed intervals (semiannual, annual, sometimes monthly). Very often the bond is negotiable, that is, the ownership of the instrument can be transferred in the secondary market. This means that once the transfer agents at the bank medallion stamp the bond, it is highly liquid on the second market.

Thus, a bond is a form of loan or IOU: the holder of the bond is the lender (creditor), the issuer of the bond is the borrower (debtor), and the coupon is the interest. Bonds provide the borrower with external funds to finance long-term investments, or, in the case of government bonds, to finance current expenditure. Certificates of deposit (CDs) or short term commercial paper are considered to be money market instruments and not bonds: the main difference is in the length of the term of the instrument.

Bonds and stocks are both securities, but the major difference between the two is that (capital) stockholders have an equity stake in the company (i.e., they are owners), whereas bondholders have a creditor stake in the company (i.e., they are lenders). Being a creditor, bondholders have priority over stockholders. This means they will be repaid in advance of stockholders, but will rank behind secured creditors in the event of bankruptcy. Another difference is that bonds usually have a defined term, or maturity, after which the bond is redeemed, whereas stocks are typically outstanding indefinitely. An exception is an irredeemable bond, such as a consol, which is a perpetuity, that is, a bond with no maturity.


$20 off Jos A Bank Sale 2017 | Groupon Coupons
photo src: www.groupon.com


Maps, Directions, and Place Reviews



Issuance

Bonds are issued by public authorities, credit institutions, companies and supranational institutions in the primary markets. The most common process for issuing bonds is through underwriting. When a bond issue is underwritten, one or more securities firms or banks, forming a syndicate, buy the entire issue of bonds from the issuer and re-sell them to investors. The security firm takes the risk of being unable to sell on the issue to end investors. Primary issuance is arranged by bookrunners who arrange the bond issue, have direct contact with investors and act as advisers to the bond issuer in terms of timing and price of the bond issue. The bookrunner is listed first among all underwriters participating in the issuance in the tombstone ads commonly used to announce bonds to the public. The bookrunners' willingness to underwrite must be discussed prior to any decision on the terms of the bond issue as there may be limited demand for the bonds.

In contrast, government bonds are usually issued in an auction. In some cases, both members of the public and banks may bid for bonds. In other cases, only market makers may bid for bonds. The overall rate of return on the bond depends on both the terms of the bond and the price paid. The terms of the bond, such as the coupon, are fixed in advance and the price is determined by the market.

In the case of an underwritten bond, the underwriters will charge a fee for underwriting. An alternative process for bond issuance, which is commonly used for smaller issues and avoids this cost, is the private placement bond. Bonds sold directly to buyers may not be tradeable in the bond market.

Historically an alternative practice of issuance was for the borrowing government authority to issue bonds over a period of time, usually at a fixed price, with volumes sold on a particular day dependent on market conditions. This was called a tap issue or bond tap.


Bank Coupon Video



Features

Principal

Nominal, principal, par, or face amount is the amount on which the issuer pays interest, and which, most commonly, has to be repaid at the end of the term. Some structured bonds can have a redemption amount which is different from the face amount and can be linked to performance of particular assets.

Maturity

The issuer has to repay the nominal amount on the maturity date. As long as all due payments have been made, the issuer has no further obligations to the bond holders after the maturity date. The length of time until the maturity date is often referred to as the term or tenor or maturity of a bond. The maturity can be any length of time, although debt securities with a term of less than one year are generally designated money market instruments rather than bonds. Most bonds have a term of up to 30 years. Some bonds have been issued with terms of 50 years or more, and historically there have been some issues with no maturity date (irredeemable). In the market for United States Treasury securities, there are three categories of bond maturities:

  • short term (bills): maturities between one and five year; (instruments with maturities less than one year are called Money Market Instruments)
  • medium term (notes): maturities between six and twelve years;
  • long term (bonds): maturities greater than twelve years.

Coupon

The coupon is the interest rate that the issuer pays to the holder. Usually this rate is fixed throughout the life of the bond. It can also vary with a money market index, such as LIBOR, or it can be even more exotic. The name "coupon" arose because in the past, paper bond certificates were issued which had coupons attached to them, one for each interest payment. On the due dates the bondholder would hand in the coupon to a bank in exchange for the interest payment. Interest can be paid at different frequencies: generally semi-annual, i.e. every 6 months, or annual.

Yield

The yield is the rate of return received from investing in the bond. It usually refers either to

  • The current yield, or running yield, which is simply the annual interest payment divided by the current market price of the bond (often the clean price).
  • The yield to maturity, or redemption yield, which is a more useful measure of the return of the bond. This takes into account the current market price, and the amount and timing of all remaining coupon payments and of the repayment due on maturity. It is equivalent to the internal rate of return of a bond.

Credit quality

The quality of the issue refers to the probability that the bondholders will receive the amounts promised at the due dates. This will depend on a wide range of factors. High-yield bonds are bonds that are rated below investment grade by the credit rating agencies. As these bonds are riskier than investment grade bonds, investors expect to earn a higher yield. These bonds are also called junk bonds.

Market price

The market price of a tradeable bond will be influenced, amongst other factors, by the amounts, currency and timing of the interest payments and capital repayment due, the quality of the bond, and the available redemption yield of other comparable bonds which can be traded in the markets.

The price can be quoted as clean or dirty. "Dirty" includes the present value of all future cash flows, including accrued interest, and is most often used in Europe. "Clean" does not include accrued interest, and is most often used in the U.S.

The issue price at which investors buy the bonds when they are first issued will typically be approximately equal to the nominal amount. The net proceeds that the issuer receives are thus the issue price, less issuance fees. The market price of the bond will vary over its life: it may trade at a premium (above par, usually because market interest rates have fallen since issue), or at a discount (price below par, if market rates have risen or there is a high probability of default on the bond).

Others

  • Indentures and Covenants -- An indenture is a formal debt agreement that establishes the terms of a bond issue, while covenants are the clauses of such an agreement. Covenants specify the rights of bondholders and the duties of issuers, such as actions that the issuer is obligated to perform or is prohibited from performing. In the U.S., federal and state securities and commercial laws apply to the enforcement of these agreements, which are construed by courts as contracts between issuers and bondholders. The terms may be changed only with great difficulty while the bonds are outstanding, with amendments to the governing document generally requiring approval by a majority (or super-majority) vote of the bondholders.
  • Optionality: Occasionally a bond may contain an embedded option; that is, it grants option-like features to the holder or the issuer:
    • Callability -- Some bonds give the issuer the right to repay the bond before the maturity date on the call dates; see call option. These bonds are referred to as callable bonds. Most callable bonds allow the issuer to repay the bond at par. With some bonds, the issuer has to pay a premium, the so-called call premium. This is mainly the case for high-yield bonds. These have very strict covenants, restricting the issuer in its operations. To be free from these covenants, the issuer can repay the bonds early, but only at a high cost.
    • Putability -- Some bonds give the holder the right to force the issuer to repay the bond before the maturity date on the put dates; see put option. These are referred to as retractable or putable bonds.
    • Call dates and put dates--the dates on which callable and putable bonds can be redeemed early. There are four main categories:
      • A Bermudan callable has several call dates, usually coinciding with coupon dates.
      • A European callable has only one call date. This is a special case of a Bermudan callable.
      • An American callable can be called at any time until the maturity date.
      • A death put is an optional redemption feature on a debt instrument allowing the beneficiary of the estate of a deceased bondholder to put (sell) the bond back to the issuer at face value in the event of the bondholder's death or legal incapacitation. This is also known as a "survivor's option".
    • Sinking fund provision of the corporate bond indenture requires a certain portion of the issue to be retired periodically. The entire bond issue can be liquidated by the maturity date; if not, the remainder is called balloon maturity. Issuers may either pay to trustees, which in turn call randomly selected bonds in the issue, or, alternatively, purchase bonds in open market, then return them to trustees.
      • Bonds are often identified by its international securities identification number, or ISIN, which is a 12 digit alphanumeric code that uniquely identifies debt securities.
  • A smart bond is an automated programmable bond contract that uses the capabilities of a blockchain database to operate as a cryptographically-secure yet open and transparent general bond ledger. It is one of a class of financial instruments known as a smart contract, "a computerized transaction protocol that executes the terms of a contract." Smart bond technology may lower transaction costs by the elimination of the "middle or back office", as well as the bond registry, substantially reducing the cost of bond servicing. Another potential benefit is the potential for instantaneous settlement, rather than the days, as well as lower operational risk. In 2015, UBS was experimenting with smart bonds that use the bitcoin blockchain.

Solidarity Shopper Coupon (M and I Bank) | Mrtnn's Blog
photo src: mrtnn.wordpress.com


Types

The following descriptions are not mutually exclusive, and more than one of them may apply to a particular bond:

  • Fixed rate bonds have a coupon that remains constant throughout the life of the bond. A variation are stepped-coupon bonds, whose coupon increases during the life of the bond.
  • Floating rate notes (FRNs, floaters) have a variable coupon that is linked to a reference rate of interest, such as Libor or Euribor. For example, the coupon may be defined as three-month USD LIBOR + 0.20%. The coupon rate is recalculated periodically, typically every one or three months.
  • Zero-coupon bonds (zeros) pay no regular interest. They are issued at a substantial discount to par value, so that the interest is effectively rolled up to maturity (and usually taxed as such). The bondholder receives the full principal amount on the redemption date. An example of zero coupon bonds is Series E savings bonds issued by the U.S. government. Zero-coupon bonds may be created from fixed rate bonds by a financial institution separating ("stripping off") the coupons from the principal. In other words, the separated coupons and the final principal payment of the bond may be traded separately. See IO (Interest Only) and PO (Principal Only).
  • High-yield bonds (junk bonds) are bonds that are rated below investment grade by the credit rating agencies. As these bonds are riskier than investment grade bonds, investors expect to earn a higher yield.
  • Convertible bonds let a bondholder exchange a bond to a number of shares of the issuer's common stock. These are known as hybrid securities, because they combine equity and debt features.
  • Exchangeable bonds allows for exchange to shares of a corporation other than the issuer.
  • Inflation-indexed bonds (linkers) (US) or Index-linked bond (UK), in which the principal amount and the interest payments are indexed to inflation. The interest rate is normally lower than for fixed rate bonds with a comparable maturity (this position briefly reversed itself for short-term UK bonds in December 2008). However, as the principal amount grows, the payments increase with inflation. The United Kingdom was the first sovereign issuer to issue inflation linked gilts in the 1980s. Treasury Inflation-Protected Securities (TIPS) and I-bonds are examples of inflation linked bonds issued by the U.S. government.
  • Other indexed bonds, for example equity-linked notes and bonds indexed on a business indicator (income, added value) or on a country's GDP.
  • Asset-backed securities are bonds whose interest and principal payments are backed by underlying cash flows from other assets. Examples of asset-backed securities are mortgage-backed securities (MBSs), collateralized mortgage obligations (CMOs) and collateralized debt obligations (CDOs).
  • Subordinated bonds are those that have a lower priority than other bonds of the issuer in case of liquidation. In case of bankruptcy, there is a hierarchy of creditors. First the liquidator is paid, then government taxes, etc. The first bond holders in line to be paid are those holding what is called senior bonds. After they have been paid, the subordinated bond holders are paid. As a result, the risk is higher. Therefore, subordinated bonds usually have a lower credit rating than senior bonds. The main examples of subordinated bonds can be found in bonds issued by banks, and asset-backed securities. The latter are often issued in tranches. The senior tranches get paid back first, the subordinated tranches later.
  • Covered bonds are backed by cash flows from mortgages or public sector assets. Contrary to asset-backed securities the assets for such bonds remain on the issuers balance sheet.
  • Perpetual bonds are also often called perpetuities or 'Perps'. They have no maturity date. The most famous of these are the UK Consols, which are also known as Treasury Annuities or Undated Treasuries. Some of these were issued back in 1888 and still trade today, although the amounts are now insignificant. Some ultra-long-term bonds (sometimes a bond can last centuries: West Shore Railroad issued a bond which matures in 2361 (i.e. 24th century) are virtually perpetuities from a financial point of view, with the current value of principal near zero.
  • Bearer bond is an official certificate issued without a named holder. In other words, the person who has the paper certificate can claim the value of the bond. Often they are registered by a number to prevent counterfeiting, but may be traded like cash. Bearer bonds are very risky because they can be lost or stolen. Especially after federal income tax began in the United States, bearer bonds were seen as an opportunity to conceal income or assets. U.S. corporations stopped issuing bearer bonds in the 1960s, the U.S. Treasury stopped in 1982, and state and local tax-exempt bearer bonds were prohibited in 1983.
  • Registered bond is a bond whose ownership (and any subsequent purchaser) is recorded by the issuer, or by a transfer agent. It is the alternative to a Bearer bond. Interest payments, and the principal upon maturity are sent to the registered owner.
  • A government bond, also called Treasury bond, is issued by a national government and is not exposed to default risk. It is characterized as the safest bond, with the lowest interest rate. A treasury bond is backed by the "full faith and credit" of the relevant government. For that reason, for the major OECD countries this type of bond is often referred to as risk-free.
  • Municipal bond is a bond issued by a state, U.S. Territory, city, local government, or their agencies. Interest income received by holders of municipal bonds is often exempt from the federal income tax and from the income tax of the state in which they are issued, although municipal bonds issued for certain purposes may not be tax exempt.
  • Build America Bonds (BABs) are a form of municipal bond authorized by the American Recovery and Reinvestment Act of 2009. Unlike traditional US municipal bonds, which are usually tax exempt, interest received on BABs is subject to federal taxation. However, as with municipal bonds, the bond is tax-exempt within the US state where it is issued. Generally, BABs offer significantly higher yields (over 7 percent) than standard municipal bonds.
  • Book-entry bond is a bond that does not have a paper certificate. As physically processing paper bonds and interest coupons became more expensive, issuers (and banks that used to collect coupon interest for depositors) have tried to discourage their use. Some book-entry bond issues do not offer the option of a paper certificate, even to investors who prefer them.
  • Lottery bonds are issued by European and other states. Interest is paid as on a traditional fixed rate bond, but the issuer will redeem randomly selected individual bonds within the issue according to a schedule. Some of these redemptions will be for a higher value than the face value of the bond.
  • War bond is a bond issued by a government to fund military operations during wartime. This type of bond has low return rate.
  • Serial bond is a bond that matures in installments over a period of time. In effect, a $100,000, 5-year serial bond would mature in a $20,000 annuity over a 5-year interval.
  • Revenue bond is a special type of municipal bond distinguished by its guarantee of repayment solely from revenues generated by a specified revenue-generating entity associated with the purpose of the bonds. Revenue bonds are typically "non-recourse", meaning that in the event of default, the bond holder has no recourse to other governmental assets or revenues.
  • Climate bond is a bond issued by a government or corporate entity in order to raise finance for climate change mitigation- or adaptation-related projects or programmes.
  • Dual currency bonds
  • Retail bonds are a type of corporate bond mostly designed for ordinary investors. They have become particularly attractive since the London Stock Exchange (LSE) launched an order book for retail bonds.
  • Social impact bonds are an agreement for public sector entities to pay back private investors after meeting verified improved social outcome goals that result in public sector savings from innovative social program pilot projects.

Foreign currencies

Some companies, banks, governments, and other sovereign entities may decide to issue bonds in foreign currencies as it may appear to be more stable and predictable than their domestic currency. Issuing bonds denominated in foreign currencies also gives issuers the ability to access investment capital available in foreign markets. The proceeds from the issuance of these bonds can be used by companies to break into foreign markets, or can be converted into the issuing company's local currency to be used on existing operations through the use of foreign exchange swap hedges. Foreign issuer bonds can also be used to hedge foreign exchange rate risk. Some foreign issuer bonds are called by their nicknames, such as the "samurai bond". These can be issued by foreign issuers looking to diversify their investor base away from domestic markets. These bond issues are generally governed by the law of the market of issuance, e.g., a samurai bond, issued by an investor based in Europe, will be governed by Japanese law. Not all of the following bonds are restricted for purchase by investors in the market of issuance.

  • Eurodollar bond, a U.S. dollar-denominated bond issued by a non-U.S. entity outside the U.S
  • Baklava bond, a bond denominated in Turkish Lira and issued by a domestic or foreign entity in the Turkish market
  • Yankee bond, a US dollar-denominated bond issued by a non-US entity in the US market
  • Kangaroo bond, an Australian dollar-denominated bond issued by a non-Australian entity in the Australian market
  • Maple bond, a Canadian dollar-denominated bond issued by a non-Canadian entity in the Canadian market
  • Masala bonds an Indian rupee denominated bond issued outside India.
  • Samurai bond, a Japanese yen-denominated bond issued by a non-Japanese entity in the Japanese market
  • Uridashi bond, a non-yen-denominated bond sold to Japanese retail investors.
  • Shibosai Bond, a private placement bond in the Japanese market with distribution limited to institutions and banks.
  • Shogun bond, a non-yen-denominated bond issued in Japan by a non-Japanese institution or government
  • Bulldog bond, a pound sterling-denominated bond issued in London by a foreign institution or government.
  • Matryoshka bond, a Russian rouble-denominated bond issued in the Russian Federation by non-Russian entities. The name derives from the famous Russian wooden dolls, Matrioshka, popular among foreign visitors to Russia
  • Arirang bond, a Korean won-denominated bond issued by a non-Korean entity in the Korean market
  • Kimchi bond, a non-Korean won-denominated bond issued by a non-Korean entity in the Korean market
  • Formosa bond, a non-New Taiwan Dollar-denominated bond issued by a non-Taiwan entity in the Taiwan market
  • Panda bond, a Chinese renminbi-denominated bond issued by a non-China entity in the People's Republic of China market
  • Dim sum bond, a Chinese renminbi-denominated bond issued by a Chinese entity in Hong Kong. Enables foreign investors forbidden from investing in Chinese corporate debt in mainland China to invest in and be exposed to Chinese currency in Hong Kong.
  • Huaso bond, a Chilean peso-denominated bond issued by a non-Chilean entity in the Chilean market.
  • Lion City bond foreign currency denominated bond issued by foreign company in Singapore

Huntington banking coupon
photo src: endecor.us


Bond valuation

At the time of issue of the bond, the interest rate and other conditions of the bond will have been influenced by a variety of factors, such as current market interest rates, the length of the term and the creditworthiness of the issuer.

These factors are likely to change over time, so the market price of a bond will vary after it is issued. The market price is expressed as a percentage of nominal value. Bonds are not necessarily issued at par (100% of face value, corresponding to a price of 100), but bond prices will move towards par as they approach maturity (if the market expects the maturity payment to be made in full and on time) as this is the price the issuer will pay to redeem the bond. This is referred to as "Pull to Par". At other times, prices can be above par (bond is priced at greater than 100), which is called trading at a premium, or below par (bond is priced at less than 100), which is called trading at a discount. Most government bonds are denominated in units of $1000 in the United States, or in units of £100 in the United Kingdom. Hence, a deep discount US bond, selling at a price of 75.26, indicates a selling price of $752.60 per bond sold. (Often, in the US, bond prices are quoted in points and thirty-seconds of a point, rather than in decimal form.) Some short-term bonds, such as the U.S. Treasury bill, are always issued at a discount, and pay par amount at maturity rather than paying coupons. This is called a discount bond.

The market price of a bond is the present value of all expected future interest and principal payments of the bond discounted at the bond's yield to maturity, or rate of return. That relationship is the definition of the redemption yield on the bond, which is likely to be close to the current market interest rate for other bonds with similar characteristics. (Otherwise there would be arbitrage opportunities.) The yield and price of a bond are inversely related so that when market interest rates rise, bond prices fall and vice versa.

The market price of a bond may be quoted including the accrued interest since the last coupon date. (Some bond markets include accrued interest in the trading price and others add it on separately when settlement is made.) The price including accrued interest is known as the "full" or "dirty price". (See also Accrual bond.) The price excluding accrued interest is known as the "flat" or "clean price".

The interest payment ("coupon payment") divided by the current price of the bond is called the current yield (this is the nominal yield multiplied by the par value and divided by the price). There are other yield measures that exist such as the yield to first call, yield to worst, yield to first par call, yield to put, cash flow yield and yield to maturity.

The relationship between yield and term to maturity (or alternatively between yield and the weighted mean term allowing for both interest and capital repayment) for otherwise identical bonds is called a yield curve. The yield curve is a graph plotting this relationship.

Bond markets, unlike stock or share markets, sometimes do not have a centralized exchange or trading system. Rather, in most developed bond markets such as the U.S., Japan and western Europe, bonds trade in decentralized, dealer-based over-the-counter markets. In such a market, market liquidity is provided by dealers and other market participants committing risk capital to trading activity. In the bond market, when an investor buys or sells a bond, the counterparty to the trade is almost always a bank or securities firm acting as a dealer. In some cases, when a dealer buys a bond from an investor, the dealer carries the bond "in inventory", i.e. holds it for his own account. The dealer is then subject to risks of price fluctuation. In other cases, the dealer immediately resells the bond to another investor.

Bond markets can also differ from stock markets in that, in some markets, investors sometimes do not pay brokerage commissions to dealers with whom they buy or sell bonds. Rather, the dealers earn revenue by means of the spread, or difference, between the price at which the dealer buys a bond from one investor--the "bid" price--and the price at which he or she sells the same bond to another investor--the "ask" or "offer" price. The bid/offer spread represents the total transaction cost associated with transferring a bond from one investor to another.


Huntington banking coupon
photo src: endecor.us


Investing in bonds

Bonds are bought and traded mostly by institutions like central banks, sovereign wealth funds, pension funds, insurance companies, hedge funds, and banks. Insurance companies and pension funds have liabilities which essentially include fixed amounts payable on predetermined dates. They buy the bonds to match their liabilities, and may be compelled by law to do this. Most individuals who want to own bonds do so through bond funds. Still, in the U.S., nearly 10% of all bonds outstanding are held directly by households.

The volatility of bonds (especially short and medium dated bonds) is lower than that of equities (stocks). Thus, bonds are generally viewed as safer investments than stocks, but this perception is only partially correct. Bonds do suffer from less day-to-day volatility than stocks, and bonds' interest payments are sometimes higher than the general level of dividend payments. Bonds are often liquid - it is often fairly easy for an institution to sell a large quantity of bonds without affecting the price much, which may be more difficult for equities - and the comparative certainty of a fixed interest payment twice a year and a fixed lump sum at maturity is attractive. Bondholders also enjoy a measure of legal protection: under the law of most countries, if a company goes bankrupt, its bondholders will often receive some money back (the recovery amount), whereas the company's equity stock often ends up valueless. However, bonds can also be risky but less risky than stocks:

  • Fixed rate bonds are subject to interest rate risk, meaning that their market prices will decrease in value when the generally prevailing interest rates rise. Since the payments are fixed, a decrease in the market price of the bond means an increase in its yield. When the market interest rate rises, the market price of bonds will fall, reflecting investors' ability to get a higher interest rate on their money elsewhere -- perhaps by purchasing a newly issued bond that already features the newly higher interest rate. This does not affect the interest payments to the bondholder, so long-term investors who want a specific amount at the maturity date do not need to worry about price swings in their bonds and do not suffer from interest rate risk.

Bonds are also subject to various other risks such as call and prepayment risk, credit risk, reinvestment risk, liquidity risk, event risk, exchange rate risk, volatility risk, inflation risk, sovereign risk and yield curve risk. Again, some of these will only affect certain classes of investors.

Price changes in a bond will immediately affect mutual funds that hold these bonds. If the value of the bonds in their trading portfolio falls, the value of the portfolio also falls. This can be damaging for professional investors such as banks, insurance companies, pension funds and asset managers (irrespective of whether the value is immediately "marked to market" or not). If there is any chance a holder of individual bonds may need to sell his bonds and "cash out", interest rate risk could become a real problem (conversely, bonds' market prices would increase if the prevailing interest rate were to drop, as it did from 2001 through 2003. One way to quantify the interest rate risk on a bond is in terms of its duration. Efforts to control this risk are called immunization or hedging.

  • Bond prices can become volatile depending on the credit rating of the issuer - for instance if the credit rating agencies like Standard & Poor's and Moody's upgrade or downgrade the credit rating of the issuer. An unanticipated downgrade will cause the market price of the bond to fall. As with interest rate risk, this risk does not affect the bond's interest payments (provided the issuer does not actually default), but puts at risk the market price, which affects mutual funds holding these bonds, and holders of individual bonds who may have to sell them.
  • A company's bondholders may lose much or all their money if the company goes bankrupt. Under the laws of many countries (including the United States and Canada), bondholders are in line to receive the proceeds of the sale of the assets of a liquidated company ahead of some other creditors. Bank lenders, deposit holders (in the case of a deposit taking institution such as a bank) and trade creditors may take precedence.

There is no guarantee of how much money will remain to repay bondholders. As an example, after an accounting scandal and a Chapter 11 bankruptcy at the giant telecommunications company Worldcom, in 2004 its bondholders ended up being paid 35.7 cents on the dollar. In a bankruptcy involving reorganization or recapitalization, as opposed to liquidation, bondholders may end up having the value of their bonds reduced, often through an exchange for a smaller number of newly issued bonds.

  • Some bonds are callable, meaning that even though the company has agreed to make payments plus interest towards the debt for a certain period of time, the company can choose to pay off the bond early. This creates reinvestment risk, meaning the investor is forced to find a new place for his money, and the investor might not be able to find as good a deal, especially because this usually happens when interest rates are falling.

Bond indices

A number of bond indices exist for the purposes of managing portfolios and measuring performance, similar to the S&P 500 or Russell Indexes for stocks. The most common American benchmarks are the Barclays Capital Aggregate (ex Lehman Aggregate), Citigroup BIG and Merrill Lynch Domestic Master. Most indices are parts of families of broader indices that can be used to measure global bond portfolios, or may be further subdivided by maturity and/or sector for managing specialized portfolios.

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search